The four axis crusher can meet the demanding work requirements, such as high mixing degree of crushed materials, complex crushing conditions, and strict control of discharge particle size. The four axis crusher developed by Yingshi machinery cites the advanced four axis crushing technology in Europe; The four axes adopt different tool structures to cooperate with each other to ensure high cutting efficiency, uniform material size after crushing and easy to control; The machine has low noise (75-85 dB), low dust and low energy consumption. It is suitable for crushing all kinds of soft and hard materials.
Four axis crusher is widely used, especially for industrial waste crushing, electronic waste crushing, medical waste crushing, old books and confidential documents crushing. Yingshi mechanical four-axis crusher series products solve the problems of low fine breaking efficiency and net blocking of easily wound materials. This crusher has excellent design, PLC control, transmission system and easy maintenance structure design.
① Main cutting mode: formed between the edges of adjacent main cutting tool groups
② Auxiliary cutting mode: relative cutting between the edges of adjacent main cutting tool groups and auxiliary cutting tool groups
Characteristics of four axis crusher
※ the screen controls the discharge, and the particle size of the discharge is uniform;
※ four cutter shafts work, with large crushing flow and high efficiency;
※ the bearing has four seals, which is effective in water and dust prevention and prolongs the service life of the bearing.
※ the motor + reducer drives the cutter shaft to achieve the shear effect of low speed and high torque.
※ the auxiliary cutting tool set has the function of auxiliary grasping, which is suitable for crushing large materials.
※ four groups of cutting tools are cut at the same time, and one crushing can meet the requirements of fine discharge particle size.
※ after the tool is worn, the European advanced tool coating and welding repair technology is adopted to realize the repeated use of the tool and greatly reduce the maintenance cost of the tool.
※ Siemens PLC monitors the motor current in real time. When the load is overloaded, the cutter shaft will automatically reverse to protect the motor.
The discharge size of the four-axis crusher is controlled by the screen. After the material is cut once, the material with particle size smaller than the screen hole will be discharged from the screen hole. The material with size larger than the screen hole will return to the crushing box for secondary cutting along the inner surface of the screen through the guidance of the main cutting knife and auxiliary cutting knife. This cycle will continue until the material can be discharged from the screen hole.
Anhui Yuzhuo Machinery Co., Ltd
Contact: manager Chen
Address: Putuoshan Road, Pingqiao Development Zone, Bowang Town, Bowang District